Development of an Ion Milling System for Figure Error Correction of a Soft X-ray Multilayer Mirror
-
- TOSAKA Aki
- IMRAM, Tohoku University
-
- SAKAI Yu
- IMRAM, Tohoku University
-
- TSURU Toshihide
- IMRAM, Tohoku University
-
- YAMAMOTO Masaki
- IMRAM, Tohoku University
Bibliographic Information
- Other Title
-
- 軟X線多層膜鏡の形状誤差補正のための大面積イオン銃を用いたミリング装置の開発
- ナンXセン タソウ マクキョウ ノ ケイジョウ ゴサ ホセイ ノ タメノ ダイメンセキ イオンジュウ オ モチイタ ミリング ソウチ ノ カイハツ
Search this article
Abstract
We have developed an ion beam milling system enabling effective, gentle and uniform milling of EUV multilayer surface of an imaging mirror for accurate compensation of the reflection phase error. An Ar ion beam of a large 150 mm in diameter accelerated at a low 500 V to avoid surface roughening is irradiated through a template selecting the areas of milling. The Ar beam profile has a quadratic distribution within 100 mm in diameter with an ion current of 0.1 mA/cm2 at the center (r=0 mm) and of 40% less 0.06 mA/cm2 at the peripheral (r=50 mm) as estimated by trench milling depth measured by an optical surface profiler (WYKO). This was also confirmed by a new detection system composed of an electrode array. A correction mask has been designed for even millig of the selected area of the sample. The milling rate of a Mo/Si multilayer with the uniform ion beam was found to be 2 min/period.<br>
Journal
-
- Journal of the Vacuum Society of Japan
-
Journal of the Vacuum Society of Japan 51 (3), 115-117, 2008
The Vacuum Society of Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390282680272172544
-
- NII Article ID
- 10021156838
-
- NII Book ID
- AA12298652
-
- ISSN
- 18824749
- 18822398
-
- NDL BIB ID
- 9471281
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed