Improvement of surface roughness of aluminum products by the micro-grooves on tool surface in cold extrusion

DOI Web Site 3 Citations 11 References
  • Kamitani Shunpei
    Department of Mechanical Engineering, Faculty of Engineering, Kagoshima University
  • Nakanishi Kenji
    Department of Mechanical Engineering, Faculty of Engineering, Kagoshima University
  • Syahrullail Samion
    Graduate School of Science and Engineering, Kagoshima University

Bibliographic Information

Other Title
  • 冷間押出工具表面の微細溝列によるアルミニウム製品表面平滑化の検討
  • レイカン オシダシ コウグ ヒョウメン ノ ビサイ コウレツ ニ ヨル アルミニウム セイヒン ヒョウメン ヘイカツカ ノ ケントウ

Search this article

Abstract

The effects of the micro-groove arrays formed on the tool surface on the material flow, surface condition of a billet and surface quality of a product were investigated by carrying out the plane strain extrusion experiments. Paraffinic mineral oil and RBD palm olein were applied in the above experiments. The distributions of flow velocity and effective strain in a billet were analyzed by using the visio-plasticity method. The experimental and analytical results show that the extrusion load increases with the inflow of billet to the grooves. The results also show that the surface condition of the extruded product is smoother when the location of the micro-groove array is at the inner section in the deformation boundary and a paraffinic mineral oil was used. The surface quality of a product in an extrusion process could be improved, under a slight rise of the extrusion load by using a tool with micro-groove arrays were formed on the tool surface at an appropriate section.

Journal

Citations (3)*help

See more

References(11)*help

See more

Keywords

Details 詳細情報について

Report a problem

Back to top