Effect of Multi-Inlet Flow on Particle Classification Performance of Hydro-Cyclones and New Estimating Equation
-
- Yoshikawa Shinsuke
- Department of Chemical Engineering, Hiroshima University
-
- Romanus Krisantus
- Department of Chemical Engineering, Hiroshima University
-
- Fukui Kunihiro
- Department of Chemical Engineering, Hiroshima University
-
- Yamamoto Tetsuya
- Department of Chemical Engineering, Hiroshima University
-
- Yoshida Hideto
- Department of Chemical Engineering, Hiroshima University
この論文をさがす
抄録
The effect of multi-inlet flow on particle classification performance of hydro-cyclones was examined experimentally and via a simulation study. The type A cyclone with two flow inlets had smaller cut size and sharper separation performance compared to the standard cyclone. Numerical simulation indicated a nearly uniform rotational fluid velocity profile for the type A cyclone. On the other hand, the standard cyclone showed a non-uniform rotational velocity profile near the inlet part of the main flow. The type B cyclone with a small additional flow injection area, showed smaller cut sizes as the flow rate of the additional flow increased. The type B cyclone showed smaller cut size compared to the standard cyclone without the additional flow. The experimental data of the type B cyclone agreed with the proposed new model based on horizontal particle separation theory. The use of a multi-inlet cyclone is quite effective at improving particle separation performance compared to the standard one.
収録刊行物
-
- JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
-
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN 41 (8), 756-765, 2008
公益社団法人 化学工学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204569625216
-
- NII論文ID
- 10024193021
-
- NII書誌ID
- AA00709658
-
- ISSN
- 18811299
- 00219592
-
- NDL書誌ID
- 9619092
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可