Production of Mn-Fe Alloy from Slag Generated in Mn-removal Treatment of Molten Cast Iron
-
- Takagawa Takahito
- Local Independent Administrative Agency Iwate Industrial Research Institute
-
- Ueda Shigeru
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
- Ike Hiroyuki
- Local Independent Administrative Agency Iwate Industrial Research Institute
-
- Iwashimizu Kouji
- Local Independent Administrative Agency Iwate Industrial Research Institute
-
- Inoue Ryo
- Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
この論文をさがす
抄録
Production of Fe–Mn alloy from the slag generated in the Mn-removal treatment of cast iron was investigated by using the method of carbon reduction of FeO–SiO2–MnO and FeO–SiO2–MnO–CaO slags at 1723 K.<br>In the first stage, almost all the Fe was reduced from the slags, followed by the reduction of Si and Mn. Finally, Fe–Mn–Si metal was obtained as a result of the reduction treatment. The addition of CaO to the FeO–SiO2–MnO slag had two effects: (1) the slag viscosity decreased, thereby improving slag reactivity, and (2) the SiO2 activity in the slag melt decreased, thereby lowering the Si content in the metal. It was confirmed that the reaction between carbon and the slag is rate limiting reaction. The contact condition between the slag and carbon has a significant influence on the slag reactivity; improvement of the contact condition leads to an increase in the slag reactivity.
収録刊行物
-
- ISIJ International
-
ISIJ International 49 (11), 1673-1677, 2009
一般社団法人 日本鉄鋼協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681464039040
-
- NII論文ID
- 10027037584
-
- NII書誌ID
- AA10680712
-
- ISSN
- 13475460
- 09151559
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可