書誌事項
- タイトル別名
-
- Hot Metal Gas Forming Process for Aluminium Alloy Tube<br>Using Sealing Pressure and Resistance Heating
- ミップウ アツリョク ト ツウデン カネツ オ モチイタ アルミニウム ゴウキンカン ノ ネツカン ガスフォーミング セイケイ
この論文をさがす
抄録
A hot metal gas forming process for an aluminium alloy tube using sealing pressure and resistance heating was developed. In this process, the sealed tube is bulged by resistance heating without controlling internal pressure. A hot metal gas forming process for an aluminium alloy tube without and with axial feeding was carried out. The deformation behaviour of the tube inside the die was observed through a heatproof glass plate attached to the side wall of the die. The sealing pressure, current density, timing of axial feeding, feeding velocity and amount of axial feeding were optimized. For excessive sealing pressure, fracture occurred, and the tube partially melted at a small sealing pressure and a large current density. Since the temperature of the tube rapidly drops after coming into contact with the die, the axial feeding before the contact is effective in preventing fracture. A ceramic die with a small thermal conductivity is useful for improving the temperature decrease and die filling.
収録刊行物
-
- 塑性と加工
-
塑性と加工 53 (612), 54-58, 2012
一般社団法人 日本塑性加工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681475598592
-
- NII論文ID
- 130004488354
- 10030028173
-
- NII書誌ID
- AN00135062
-
- COI
- 1:CAS:528:DC%2BC38Xks1Ggsb8%3D
-
- ISSN
- 18820166
- 00381586
-
- NDL書誌ID
- 023501791
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可