フランジ呼び径が内圧を受ける管フランジ締結体の力学特性および密封性能に及ぼす影響

書誌事項

タイトル別名
  • The Effects of Nominal Diameter on Mechanical Characteristics and Sealing Performance of Pipe Flange Connection under Internal Pressure
  • フランジ ヨビ ケイ ガ ナイアツ オ ウケル クダフランジ テイケツタイ ノ リキガク トクセイ オヨビ ミップウ セイノウ ニ オヨボス エイキョウ

この論文をさがす

抄録

This paper deals with the effects of the nominal diameter of a pipe flange connection with a non-asbestos spiral wound gasket under an internal pressure on the mechanical characteristics such as the contact gasket stress distribution which governs the sealing performance, the load factor and the hub stress of the connection. The stresses in the pipe flange connections with the nominal diameters from 3”to 24” under internal pressure are analyzed using finite element method taking account the hysteresis and non-linearity in the non-asbestos spiral wound gasket. As a result, it is found that the variations in the contact gasket stress distributions are substantial due to the flange rotation in the pipe flange connections with the larger nominal diameter. Leakage tests were conducted to measure the axial bolt forces (the load factor) and the hub stress. The results obtained from the FEM analyses are fairly consistent with the experimental results concerning the variation in the axial bolt forces (the load factor) and the hub stress. Using the obtained contact gasket stress distributions and the fundamental relationship between the amount of leakage and the gasket stress, the amount of the leakage of the pipe flange connection is estimated. The estimated results are in a fairly good agreement with the measured results. The difference in the hub stress between the FEM and ASME code is demonstrated and the sealing performance of the non-asbestos gasket is discussed.

収録刊行物

  • 圧力技術

    圧力技術 50 (3), 112-120, 2012

    一般社団法人 日本高圧力技術協会

参考文献 (14)*注記

もっと見る

詳細情報

問題の指摘

ページトップへ