最適切削条件選定用エキスパートシステムの開発に関する研究　第２報　加工精度・仕上げ面粗さ評価用サブシステム

DOI Web Site

書誌事項

タイトル別名
  • On the Development of Expert System for Selecting the Optimum Cutting Conditions. 2nd Report. Subsystems for Evaluating Dimensional Accuracy and Surface Roughness.
  • サイテキ セッサク ジョウケン センテイヨウ エキスパート システム ノ カイ
  • Subsystems for Evaluating Dimensional Accuracy and Surface Roughness
  • 加工精度・仕上げ面粗さ評価用サブシステム

この論文をさがす

抄録

For the system selecting the optimum cutting conditions, subsystems have been developed to predict the trouble occurrence in dimensional accuracy and surface roughness of machined workpiece with linear evaluation functions. Variables of the functions are selected among operational characteristics and workpiece characteristics which are gathered by questionary investigation and/or interview to expert engineers, and literature survey as well. The necessity.and the linear independence of the variables under consideration are further examined by fuzzy measures in expert engineer's subjective evaluation process. The weight coefficients of the variables in the function are objectively determined by learning of machining data in the data base so that the values of the function may be calculated to yield the same order of value as those of dimensional accuracy or surface roughness in the machining data. The subsystems perform well and can be applicable to the wide range of cutting conditions.

収録刊行物

  • 精密工学会誌

    精密工学会誌 57 (6), 1053-1059, 1991

    公益社団法人 精密工学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ