鋼板強度の結晶粒径依存性に及ぼすひずみ速度の影響

DOI Web Site 被引用文献12件 参考文献17件

書誌事項

タイトル別名
  • Influence of Strain Rate on Grain Size Dependence of Strength of Sheet Steel.
  • コウハン キョウド ノ ケッショウ リュウケイ イゾンセイ ニ オヨボス ヒズ

この論文をさがす

抄録

Influence of strain rates on the grain size dependence of tensile deformation behavior was investigated on a mild steel and solid-solute hardened 440MPa and 590MPa grade steels. The grain size of these steels was ranged from 0.005mm to 0.2mm in diameter. Tensile tests were performed at strain rates of 0.02/s and 2/s with an Instron tensile machine, and at 2000/s with a split-Hopkinson pressure bar apparatus. The relationships between yield strength and grain size of the steels investigated were well represented by the Hall-Petch relationship, and the energy absorbed during deformation at the strain rate of 2000/s increased for finer grain size. The grain size dependence of the yield strength of the 440MPa and 590MPa grade steels was intensified with increase in strain rate, while, those of the mild steel were almost independent of the strain rate. The n-value of the mild steel was remarkably reduced with an increase of the strain rate. The grain size, however, didn't affect the n-value.

収録刊行物

  • 材料

    材料 47 (10), 1053-1058, 1998

    公益社団法人 日本材料学会

被引用文献 (12)*注記

もっと見る

参考文献 (17)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ