18-8ステンレス鋼の高温ねじりクリープ強度に関する研究 (第4報)

DOI Web Site

書誌事項

タイトル別名
  • On the High-temperature Torsional Creep Strength of 18-8 Stainless Steel (Part 4)
  • 18-8 ステンレス コウ ノ コウオンネジリ クリープ キョウド ニ カンスル ケンキュウ 4
  • Effect of Temperature of Torsional Working on the Torsional Creep Strength of 18-8 Cb Stainless Steel
  • 18-8Cbステンレス鋼のねじりクリープ強度に及ぼすねじり加工温度の影響

この論文をさがす

抄録

In the last paper, authors reported that the torsional working temperature has a remarkable influence on the torsional creep limit of a plain 18-8 stainless steel. Through the present investigation, measurement of torsional creep limit of a 18-8 Cb Stainless steel bar (5mmφ×50mm) austenized and twisted to a degree of 0.128π/cm or 0.256π/cm was made at 500 and 600°C, and then hardness and micrographic testing and X-ray analysis were carried out. These results obtained are summalized as follows:<br>Torsional creep limit of a 18-8 Cb stainless steel is not so much affected by the torsional working temperature of -60∼800°C as in case of the creep limit of plain 18-8 stainless steel.<br>In this 18-8 Cb stainless steel, it was found that the effects of torsional working temperature on the difference of the hardness before and after creep testing and also on the precipitation mode of Cb-carbide (CbC) were small.

収録刊行物

  • 材料

    材料 12 (112), 59-64, 1963

    公益社団法人 日本材料学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ