A Study of Residual Stress for Opening and Closing Behavior of Fatigue Cracks

この論文をさがす

抄録

The distribution of residual stress in the vicinity of fatigue crack tips and behind them for S15C and SK-5 were measured by X-ray microbeam equipment. Fatigue cracks were loaded and unloaded and then the behaviors of opening and closing were examined analytically. The results obtained are summarized as follows. ( 1 ) A monotonic plastic zone ahead of the crack tip and a cyclic plastic zone was found in the crack tip vicinity. ( 2 ) The ratios of fatigue crack opening and closing found by X-ray measurement were in good agreement with the value found by the microdisplacement method.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ