Fretting Fatigue Analysis Using Fracture Mechanics
-
- HATTORI T.
- Mechanical Engineering Research Laboratory,Hitachi Ltd.,
-
- NAKAMURA Masayuki
- Mechanical Engineering Research Laboratory,Hitachi Ltd.,
-
- SAKATA Hiroshi
- Mechanical Engineering Research Laboratory,Hitachi Ltd.,
-
- WATANABE Takashi
- Mechanical Engineering Research Laboratory,Hitachi Ltd.,
この論文をさがす
抄録
In this paper, an estimation method for fretting fatigue strength is proposed. Fretting fatigue cracks initiate very early in the fatigue life of metals, which is dominated by the propagation process of small cracks. Characteristics of fretting fatigue cracks are analysed using stress intensity factors at the tip of cracks growing from the contact edges. The stress intensity factors are calculated from the contact pressure and tangential stress distributions on the contact surfaces. Fretting fatigue limits were estimated by comparing the stress intensity factor ranges with the threshold stress intensity factor range of the material. These calculated results were then compared with experimental results of fretting fatigue tests.
収録刊行物
-
- JSME Int. J., Ser. A
-
JSME Int. J., Ser. A 31 (1), 100-, 1988
一般社団法人日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1572543027027917696
-
- NII論文ID
- 110002348401
-
- NII書誌ID
- AA10680585
-
- ISSN
- 09148809
-
- 本文言語コード
- en
-
- データソース種別
-
- CiNii Articles