Distribution of Load in the Screw Thread of a Bolt-Nut Connection Subjected to Tangential Forces and Bending Moments

• YAZAWA Shimpachi

• HONGO Kaoru

抄録

An expression of the distribution of load in the screw thread of a bolt-nut connection which is subjected not only to axial forces but also simultaneously to tangential forces and bending moments is obtained in the following process. First, let an expression of the distribution of load in a screw thread be a polynomial of turning angle (angle of rotation of point moving along the helix of the screw) as the variable with undetermined coefficients. Next, using the above expression, calculate the resultant axial force, resultant tangential force, bending moment at the bearing surface of the bolt head, deflection and deflection angle of the bolt as a distance from the bolt head. Then, decide the undermined coefficients in the postulated polynomial by means of the linear programming method, so that the results from the above calculation with this polynomial approach the experimental results as closely as possible.

収録刊行物

• JSME international journal. Ser. 1, Solid mechanics, strength of materials

  JSME international journal. Ser. 1, Solid mechanics, strength of materials 31 (2), 174-180, 1988

  一般社団法人 日本機械学会

キーワード

• Fixing Element
• Screw Thread
• Bolt-Nut Connection
• Axial Force
• Tangential Force
• Bending Moment
• Distribution Load

詳細情報

• CRID: 1390001205433782656
• NII論文ID: 110002348408
• NII書誌ID: AA10680585
• DOI: 10.1299/jsmea1988.31.2_174
• ISSN: 09148809
• Web Site: https://www.jstage.jst.go.jp/article/jsmea1988/31/2/31_2_174/_pdf
• 本文言語コード: en
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可