Dynamic Behavior of Straight Bevel Gear : 1st Report, Dynamic Load Torque Variation and Bending Vibration of Gear Shaft

DOI Web Site

この論文をさがす

抄録

Using a power circulating type gear testing machine for straight bevel gears, the dynamic load of gear teeth, the torque variation and the bending vibration of gear shaft are measured under a constant torque with the speed of gear varied, and the results are discussed. The results are as follows : According as the speed of gear increases, the dynamic load factor varies in accordance with the contact position on a tooth trace and the load. The dynamic load factor is influenced more at the toe or center of bevel gear tooth than at the heel by the torque variation and the bending vibration of gear shaft. And the torque variation and the bending vibration of gear shaft are influenced considerably by the torsional vibration at the natural frequency of meshing gear.

収録刊行物

  • Bulletin of JSME

    Bulletin of JSME 23 (175), 126-131, 1980

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ