Experimental Study on Sodium Pool Boiling : Measurement of Superheat at Boiling Incipience and Heat Transfer

この論文をさがす

抄録

A precise determination of both superheats at boiling incipience and boiling heat transfer of liquid metals is required for practical engineering problems. From this point of view, numerous experiments on boiling heat transfer in liquid metals have been reported since more than ten years ago. There exists, however, a large scatter among these experimental data. The main purpose of this experiment is to try to find a dominant factor by which so large a scatter is caused. The heating surface used in this experiment was machined only by a lathe, considering a practical use. Superheats at boiling incipience and boiling heat transfer coefficient were measured in the pressure range from 0.01 kg/cm2 up to 2.0 kg/cm2, and the discussion especially on the effect of dissolved gas was presented.

収録刊行物

  • Bulletin of JSME

    Bulletin of JSME 18 (118), 405-410, 1975

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ