単純モデルの組み合わせによる機能的連続体の設計法

• 多加 充彦

• 尾田 十八

書誌事項

タイトル別名

• On Design Technique of Functional Continuum using Combined Simple Models.
• タンジュン モデル ノ クミアワセ ニ ヨル キノウテキ レンゾクタイ ノ セッケイホウ

抄録

In this paper, the design method of the functional continuum by combining the fundamental simple mechanism models is proposed. First, the formula to calculate the whole displacement ratio of output to input is deduced from the mechanical analysis of the two simple functional continuum which are combined. By using this formula, the design condition amplifying displacement is obtained, and applied to the device design which amplifies the displacement into the same direction. In this design, the optimum structure, which has the maximum displacement ratio, is obtained by using the displacement ratio and stiffness coefficient that are analyzed by the finite element method of each device to this formula. As the results, it is obvious that the proposed method is useful for the design of combining the functional continuum.

収録刊行物

• 日本機械学会論文集Ａ編

  日本機械学会論文集Ａ編 68 (670), 873-878, 2002

  一般社団法人 日本機械学会

キーワード

• Computational Mechanics
• Optimum Design
• Finite Element Method
• Functional Continuum
• Mechanical Amplifier
• Design Engineering

詳細情報

• CRID: 1390001204448321152
• NII論文ID: 110002370157
• NII書誌ID: AN0018742X
• DOI: 10.1299/kikaia.68.873
• ISSN: 18848338
• ISSN: 03875008
• NDL書誌ID: 6201643
• Web Site: https://ndlsearch.ndl.go.jp/books/R000000004-I6201643
• Web Site: http://www.jstage.jst.go.jp/article/kikaia1979/68/670/68_670_873/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • NDL
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可