スカーフ接着継手の強度評価　Ｉ　　被着体が同種金属材料の場合

• 京極 秀樹

• 杉林 俊雄

• 池上 皓三

書誌事項

タイトル別名

• Strength evaluation of scarf joint bonded with adhesive resin. (1st report Adherends of the same metals)
• スカーフ セッチャク ツギテ ノ キョウド ヒョウカ 1 ヒチャクタイ ガ ド

抄録

The strength evaluation of adhesively bonded scarf joints having adherends of similar materials was investigated both analytically and experimentally, in order to establish the strength design of adhesive bonding. The strain and stress distributions in the joints of carbon steel (S45C) bonded with epoxy resin were analyzed by applying the elastic finite element method. The strength of the joints was predicted by applying the strength laws to the adherend, adhesive layer and their interfaces. The validity of the predicted joint strength was confirmed by the experimental results. The effects of the joint dimensions on the strength were examined by varying the overlap length (or scarf angle) and the adherend thickness. The analytical strain distributions were in good agreement with the experimental ones. The results of strength prediction coincided approximately with the experimental ones, so the joint strength was successfully predicted by applying the strength laws to those analytical results.

収録刊行物

• 日本機械学会論文集Ａ編

  日本機械学会論文集Ａ編 53 (487), 499-505, 1987

  一般社団法人 日本機械学会

キーワード

• Elasticity
• Scarf Joint
• Stress Distribution
• Strain Distribution
• Strength Evaluation
• Finite Element Method

詳細情報

• CRID: 1390282679455932928
• NII論文ID: 110002377215
• NII書誌ID: AN0018742X
• DOI: 10.1299/kikaia.53.499
• ISSN: 18848338
• ISSN: 03875008
• NDL書誌ID: 3132522
• Web Site: https://ndlsearch.ndl.go.jp/books/R000000004-I3132522
• Web Site: http://www.jstage.jst.go.jp/article/kikaia1979/53/487/53_487_499/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • NDL
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可