書誌事項
- タイトル別名
-
- Hammering Incremental Forming of Sheet Metals Using CCD Camera and Database.
- CCD カメラ ト データベース オ モチイタ イタザイ ノ ハンマリング チ
この論文をさがす
抄録
An incremental forming system is developed as flexible forming of sheet metals. In this system, the sheets are bent into desired shapes by repeating local deformation due to the hammering. The forming process is divided into roughing and finishing operations. In the roughing operation, the sheet is hammered in accordance with a sequence stored in a database. On the other hand, the roughly formed shape is corrected into a desired one by hammering at points of large differences of shape in the finishing operation. The three-dimensional shape of the sheet during the forming is calculated from the distortion of grid pattern measured by a CCD camera system by means of the Fourier transform grid method. Aluminum square sheets are formed by an incremental forming machine with a set of hemispherical punch and rubber die. The sheet is moved by a rectangular coordinate robot to Change the position for the local bending with the punch. The sheets are successfully formed into a sphere, frustum of cone, paraboloid and hyperboloid.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 64 (622), 2240-2246, 1998
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681304937600
-
- NII論文ID
- 130004232792
- 110002383817
-
- NII書誌ID
- AN00187463
-
- COI
- 1:CAS:528:DyaK1cXltlKmtbs%3D
-
- ISSN
- 18848354
- 03875024
-
- NDL書誌ID
- 4504357
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可