書誌事項
- タイトル別名
-
- Pressure Sintering Characteristics with Chemical Reaction between Dissimilar Metal Powders by DC Pulse Resistance-Sintering Process.
- DC パルス ツウデン カネツ ショウケツホウ ニ ヨル イシュ キンゾクソ フンマツ ノ カアツ ハンノウ ショウケツ トクセイ
この論文をさがす
抄録
A DC pulse resistance-sintering process is introduced to reduce the long processing time in the net shape sintering process of parts including intermetallic compounds by a hot-pressing (HP) process with chemical reaction between copper and aluminum powders and titanium and aluminum powders. By the DC pulse resistance-sintering mixed powder materials are sintered directly by a phenomenon of microscopic electric discharge between the particles using a DC pulse generator under a punch pressure in a graphite die. The powder mixtures of Cu-33 at % Al and Ti-50 at % Al were milled by a mechanical alloying (MA) process. The MA powder mixtures were sintered using the DC pulse resistance-sintering process. It has been confirmed that the mechanical properties obtained in a short processing time of only about 10 min by the resistance-sintering processes are as same as those in a long processing time of 2-3 hours by the HP process.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 67 (660), 2692-2699, 2001
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206328667136
-
- NII論文ID
- 110002386343
- 130004234145
-
- NII書誌ID
- AN00187463
-
- COI
- 1:CAS:528:DC%2BD3MXnvFartbg%3D
-
- ISSN
- 18848354
- 03875024
-
- HANDLE
- 10297/4684
-
- NDL書誌ID
- 5889104
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- IRDB
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可