せん断加工したタプとスロットを用いたT継手の締結特性 河村 忠治 一般社団法人日本機械学会 日本機械学會論文集. C編 03875024 54 507 2760 2764 1988-11-25 To investigate the mechanics of the staking process. the fastening of tee-joint with sheared tab and slot is carried out for different snaps. The staking modes of the joint unions at different press-fitting force are obtained, and results are discussed by using pull-apart force and appearance of the joint. The fastening strength in the staking, is found to be dependent on snap shape, combining materials, length of tab and edge shape of slot hole. 1988-11-25 110002391251 AN00187463 3205297 JPN NDL NII-ELS 3 Fastening Characteristics of the Tee-Joint with Sheared Tab and Slot KAWAMURA Chuii The Japan Society of Mechanical Engineers Transactions of the Japan Society of Mechanical Engineers. C To investigate the mechanics of the staking process. the fastening of tee-joint with sheared tab and slot is carried out for different snaps. The staking modes of the joint unions at different press-fitting force are obtained, and results are discussed by using pull-apart force and appearance of the joint. The fastening strength in the staking, is found to be dependent on snap shape, combining materials, length of tab and edge shape of slot hole. 河村 忠治 KAWAMURA Chuii 武蔵工業大学