エッジの小さな切落しによる物体の抗力の軽減　　正方形断面の角柱の場合

• 倉田 光雄

• 森澤 卓矢

• 平川 浩司

• 安富 善三郎

• 木田 輝彦

書誌事項

タイトル別名

• Drag Reduction of a Bluff Body with Small Cutout at Its Edges. Case of Prism with Square Cross-section.
• エッジ ノ チイサナ キリオトシ ニヨル ブッタイ ノ コウリョク ノ ケイゲ

抄録

The effect of the small cutout of the edges of a square prism on drag reduction is examined experimentally in order to obtain the best cutout shape of the square prism. In the present experiment, drag coefficient, backpressure coefficient, Strouhal number and pressure distribution on the surface of the body are measured and flow visualization around the body is carried out by means of hydrogen bubble and oil flow methods. The experimental results show : (1) There is an appropriate cutout of the edges of the square prism such that the ratio of the drag coefficient of the square prism with small rectangular cutout to that without cutout is less than 0.4. (2) In the case of small square cutout of the edges of the square prism, the drag coefficient is less than that in the case of small round cutout and (3) the drag coefficient of the square prism becomes less than that of the circular cylinder, when we cut appropriately its edges.

収録刊行物

• 日本機械学会論文集Ｂ編

  日本機械学会論文集Ｂ編 64 (618), 397-404, 1998

  一般社団法人 日本機械学会

キーワード

• Cutout

詳細情報

• CRID: 1390282680870978944
• NII論文ID: 130004222895
• NII論文ID: 110002396804
• NII書誌ID: AN00187441
• DOI: 10.1299/kikaib.64.397
• ISSN: 18848346
• ISSN: 03875016
• ISSN: http://id.crossref.org/issn/00290270
• NDL書誌ID: 4412320
• Web Site: https://ndlsearch.ndl.go.jp/books/R000000004-I4412320
• Web Site: http://www.jstage.jst.go.jp/article/kikaib1979/64/618/64_618_397/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • NDL
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可