書誌事項
- タイトル別名
-
- 218 On the Room Temperature Frozen Strain Method by Using Polycarbonate Resin
抄録
The frozen strain method has been carried out by long time load under the low temperature or load in the short time over glass transition temperature. The former needs the long time course, the latter causes large deformation by the load, since the Young's modulus changes small and Poisson ratio increases. For the purpose of this experimental study, using the polycarbonate, trying to reduce the days spent for the experiment and to froze the strain under the room temperature. In the industrial product, the polycarbonate used in this study is made by the extruding. Therefore, there is the residual stress. Annealing is effective measures in order to reduce the residual stress. By comparing the polycarbonate with annealing to the polycarbonate without that, the effect of annealing is confirmed.
収録刊行物
-
- 材料力学部門講演会講演論文集
-
材料力学部門講演会講演論文集 2001 (0), 151-152, 2001
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206067407104
-
- NII論文ID
- 110002486771
-
- ISSN
- 24331287
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可