A Flow Rate Control Valve Using a Piezoelectric Element
-
- NOGI Toshiharu
- Hitachi Research Laboratory, Hitachi Ltd.
-
- YAMAUCHI Teruo
- Hitachi Research Laboratory, Hitachi Ltd.
-
- OHYAMA Yoshishige
- Hitachi Research Laboratory, Hitachi Ltd.
この論文をさがす
抄録
A flow rate control valve using a piezoelectric element has been investigated. The valve has a horn and a ball (diameter : 4mm) which are vibrated by the piezoelectric element. The liquid flow rate is controlled by the valve-opening time. The element is effective for decreasing the time required for valve open in order to supply a voltage when the pulse width is increased. Flow rate increases linearly when the pulse width is increased. The minimum pulse width is 0.4ms, which is smaller than the 1ms-width minimum for a valve using a solenoid coil.
収録刊行物
-
- JSME international journal. Ser. 2, Fluids engineering, heat transfer, power, combustion, thermophysical properties
-
JSME international journal. Ser. 2, Fluids engineering, heat transfer, power, combustion, thermophysical properties 35 (3), 376-379, 1992-08-15
一般社団法人日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1572261552061064064
-
- NII論文ID
- 110002492645
-
- NII書誌ID
- AA10680596
-
- ISSN
- 09148817
-
- 本文言語コード
- en
-
- データソース種別
-
- CiNii Articles