Effect of Standard Pressure Angle on the Bending Fatigue Strength of Helical Gears
-
- ODA Satoshi
- Faculty of Engineering, Tottori University
-
- KOIDE Takao
- Faculty of Engineering, Tottori University
-
- SAWA Yasuhiro
- Honda Motor Co., Ltd.,
この論文をさがす
抄録
This paper presents a study on the effect of standard pressure angle on the bending fatigue strength of helical gears. The root stresses of meshing helical gears with various pressure angles, helix angles and whole tooth depths were calculated by using the approximate equations for deflection and bending moment due to a concentrated load on gear teeth of full depth and long teeth with various pressure angles and Kubo and Umezawa's method. Bending fatigue tests were performed on helical gears of full depth teeth with various pressure angles and helix angles. On the basis of these results, the effects of pressure angle, helix angle, and whole tooth depth on the root stresses and bending fatigue strength of helical gears were clarified to a considerable extent.
収録刊行物
-
- JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry
-
JSME international journal. Ser. 3, Vibration, control engineering, engineering for industry 31 (4), 802-807, 1988-12-15
一般社団法人日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1571698602025262464
-
- NII論文ID
- 110002505020
-
- NII書誌ID
- AA10680610
-
- ISSN
- 09148825
-
- 本文言語コード
- en
-
- データソース種別
-
- CiNii Articles