傾斜パッド型ヘッドを用いたCoPtCr‐SiO2垂直二層膜シリンダ状媒体の検討

書誌事項

タイトル別名
  • Examination of CoPtCr-SiO2 Perpendicular Double-Layered Cylindrical Media Using an Inclined-Pad-Type Head
  • 傾斜パッド型ヘッドを用いたCoPtCr-SiO2垂直二層膜シリンダ状媒体の検討
  • ケイシャ パッドガタ ヘッド オ モチイタ CoPtCr SiO2 スイチョク 2ソウ マク シリンダジョウ バイタイ ノ ケントウ

この論文をさがす

抄録

A cylindrical magnetic storage system was developed, using inclined-pad-type heads and perpendicular double-layered media with a CoPtCr-SiO2 recording layer. The inclined ABS (air-bearing surface) slider has an inclined leading pad formed on the leading edge of the slider and a trailing pad formed on the trailing edge of the slider to generate an air-bearing force. The fabricated head exhibits flying stability on a rotating cylindrical medium. A composite recording layer, CoPtCr-SiO2/Ru/Pt/Ta deposited on a rotating cylindrical substrate with a soft magnetic underlayer (SUL) shows high coercivity over 5 kOe, and squareness ratio of around 1, which are almost the same characteristics as the same composite recording layer on a conventional disk substrate with SUL. The fundamental read/write characteristics of CoPtCr-SiO2/CoZrNb perpendicular double-layered cylindrical media were measured using a merged-type GMR head with an inclined-pad-type slider designed for use with cylindrical media. The envelope of the head output did not show any modulation, large spike pulses, or thermal asperity associated with contact with the cylindrical medium. Isolated waveforms with sufficient symmetry were also obtained.

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (20)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ