Development of Micro Channel Heat Exchanging

In order to investigate the performance of the micro channel heat exchanger, three-dimensional numerical simulations and experiments on heat transfer behavior and pressure loss were carried out. So far as the heat transfer phenomena is concerned, results obtained using a silicon chip micro channel model showed a very small thermal resistance, about 0.1(K(cm)^2/W). And, measured pressure loss showed good agreement with that of analytical result obtained on the basis of fully developed laminar pipe flow assumption. Furthermore, a practical setup was made with a micro channel heat exchanger to clarify the possibility of using the micro channel heat exchanger in electrical equipment. As a result, it was confirmed that the performance of the micro channel heat exchanger system is sufficient to cool a silicon chip which generates a large amount of heat, and the scale of the system is compact compared to that of the whole setup of electrical equipment.