書誌事項
- タイトル別名
-
- Shear adhesive strength of dental adhesive cements to porcelains. Influence of porcelains and surface treatment methods.
- Innuence of Porcelains and Surface Treatment Methods
- 陶材の種類とその表面研削法が接着性に及ぼす影響
この論文をさがす
抄録
Shear adhesive strength (after 24 hours water immersion period) of dental adhesivecements to dental porcelains were investigated. As adhesives, Super-Bond C & B, Panavia-EXand HY-BOND Carbo Cement were used. As adherends, VITA VMK 68 opabue, VITA DUR-Ncore and Cerachrome-L were used. The surface treatments of porcelains were as follows.<BR>1. Polishing by # 600 Emery paper, 2. Sand blasting by 50 μmφ glass beads, 3. Sand blastingby alumina powder which had 20-40 μm particle size.<BR>The results were summarized as follows.<BR>1. Super-Bond C B had excellent adhesion to any porcelain on any surface treatment.<BR>The adhesive strength were 220-310 kgf/cm 2.2. Panavia-EX were influenced by surface treatment of porcelain. Sand blasting by aluminahad good effect on adhesion.<BR>3. Panavia-EX had higher adhesion to aluminous porcelain than metal fusing porcelain.<BR>4. HY-BOND Carbo Cement showed somewhat of adhesiveness to VITA VMK68 opaque.<BR>The adhesive strength were about 100 kgf/cm2.
収録刊行物
-
- 日本補綴歯科学会雑誌
-
日本補綴歯科学会雑誌 30 (1), 207-215, 1986
社団法人 日本補綴歯科学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282679389491840
-
- NII論文ID
- 110003855217
-
- NII書誌ID
- AN00197911
-
- ISSN
- 1883177X
- 03895386
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可