In-situ observation of the soot deposition process on a solid wall with a diffusion flame along the wall In-Situ Observation of the Soot Deposition Process on a Solid Wall with a Diffusion Flame along the Wall

    • CHOI Jae Hyuk
    • Division of Mechanical and Space Engineering, Hokkaido University
    • FUJITA Osamu
    • Division of Mechanical and Space Engineering, Hokkaido University
    • KIM Junhong
    • School of Mechanical and Aerospace Engineering, Seoul National University

    • CHUNG Suk Ho
    • School of Mechanical and Aerospace Engineering, Seoul National University

Abstract

Experiments at the Japan Microgravity Center (JAMIC) have investigated the interaction between diffusion flames and solid surfaces placed near flames. The fuel for the flames was C2H4 and the surrounding oxygen concentration 35%, with surrounding air temperatures of T-a = 300 and 600 K. The effects of these parameters on soot distribution in diffusion flames and soot deposition on solid walls were studied. Direct images of the whole flame and shadow images of the flame with back light were recorded and used to calculate the soot volume fraction by the Abel transformation method. Results show that at the higher surrounding air temperature the soot particle distribution region is closer to the wall and results in more deposition. Numerical simulation was also performed to determine the motion of soot particles in the flames and the soot deposition characteristics. The results are in good agreement with the observed soot behavior in microgravity.

Experiments at the Japan Microgravity Center (JAMIC) have investigated the interaction between diffusion flames and solid surfaces placed near flames. The fuel for the flames was C_2H_4 and the surrounding oxygen concentration 35%, with surrounding air temperatures of T_a=300 and 600K. The effects of these parameters on soot distribution in diffusion flames and soot deposition on solid walls were studied. Direct images of the whole flame and shadow images of the flame with back light were recorded and used to calculate the soot volume fraction by the Abel transformation method. Results show that at the higher surrounding air temperature the soot particle distribution region is closer to the wall and results in more deposition. Numerical simulation was also performed to determine the motion of soot particles in the flames and the soot deposition characteristics. The results are in good agreement with the observed soot behavior in microgravity.

Journal

JSME international journal. Ser. B, Fluids and thermal engineering   [List of Volumes]

JSME international journal. Ser. B, Fluids and thermal engineering 49(1), 167-175, 2006-02-15  [Table of Contents]

The Japan Society of Mechanical Engineers

References:  25

You must have a user ID to see the references.If you already have a user ID, please click "Login" to access the info.New users can click "Sign Up" to register for an user ID.

Preview

Preview

Codes

  • NII Article ID (NAID) :
    110004086932
  • NII NACSIS-CAT ID (NCID) :
    AA10888815
  • Text Lang :
    ENG
  • Article Type :
    ART
  • ISSN :
    13408054
  • NDL Article ID :
    7813209
  • NDL Source Classification :
    ZN11(科学技術--機械工学・工業)
  • NDL Call No. :
    Z53-Y271
  • Databases :
    CJP  NDL  NII-ELS  IR  J-STAGE