空気流通型充填層による炭材内装ペレットの熱炭素還元(熱炭素還元および部分還元焼結,焼結その4,<特集号>製銑プロセスの環境調和・資源対応力強化を目指して) Carbothermic Reduction of the Composite Pellet of Iron Ore and Coal in the Packed Bed with Air Flow(Carbothermic Reduction and Partial Reduction Sintering,Sintering-4,<Special Issue>Advancement for Sustainability and Resource Flexibility of the Ironmaking Processes)

この論文をさがす

著者

抄録

In order to examine the feasibility of the carbothermic reduction process using the composite pellets of iron ore and coal fines in their combustion packed bed, laboratory scale experiments were conducted. To prevent the reoxidation of the reduced pellets, attempts were made by coating the composite pellets with different fine materials such as iron ore, limestone, dolomite, serpentine and SiO_2 reagent. The isothermal reduction experiment using a single composite pellet shows that SiO_2 bearing material, such as serpentine fine and SiO_2 reagent, give a reasonable suppression effect on the reoxidation at high temperature. The metallization degree of about 70% has been attained. On the basis of this result, the carbothermic reduction experiment in the combustion packed bed was conducted using the composite pellet coated with SiO_2 reagent powder. In this case, the maximum metallization degree was as much as 45% because of the reoxidation of metallic iron could not be perfectly suppressed during the process. Further reduction experiment was carried out using the composite pellet coated by the fine mixture of CaO-SiO_2-Al_2O_3 system to form a melt of the coating layer in high temperature. It gives the maximum metallization degree of about 60%. It suggests that the proposed carbothermic reduction process has a possibility to produce the partially-reduced iron burdens for the blast furnace, although its production rate is necessary to be improved.

収録刊行物

  • 鐵と鋼 : 日本鐡鋼協會々誌

    鐵と鋼 : 日本鐡鋼協會々誌 92(12), 809-814, 2006-12-01

    社団法人日本鉄鋼協会

参考文献:  6件中 1-6件 を表示

  • <no title>

    SATO K.

    CAMP-ISIJ 14, 903, 2001

    被引用文献1件

  • <no title>

    JINBO J.

    Kobe Steel Eng. Rep. 46, 14, 1996

    被引用文献1件

  • <no title>

    KAWAGUCHI T.

    CAMP-ISIJ 13, 124, 2000

    被引用文献1件

  • <no title>

    IGUCHI Y.

    Tetsu-to-Hagane 85, 439, 1999

    被引用文献1件

  • <no title>

    KITAJIMA T.

    CAMP-ISIJ 12, 245, 1999

    被引用文献1件

  • <no title>

    KASAI E.

    CAMP-ISIJ 40, 842, 2000

    被引用文献1件

各種コード

  • NII論文ID(NAID)
    110004862657
  • NII書誌ID(NCID)
    AN00151251
  • 本文言語コード
    JPN
  • 資料種別
    ART
  • ISSN
    00211575
  • NDL 記事登録ID
    8599342
  • NDL 雑誌分類
    ZP42(科学技術--金属工学・鉱山工学--鉄鋼)
  • NDL 請求記号
    Z17-356
  • データ提供元
    CJP書誌  NDL  NII-ELS  J-STAGE 
ページトップへ