RC造骨組の静的漸増載荷解析と動的地震応答解析における柱の部材モデルの影響

DOI Web Site Web Site 参考文献24件
  • 朴 哲敏
    東京大学大学院工学系研究科建築学専攻
  • 塩原 等
    東京大学大学院工学系研究科建築学専攻
  • 楠原 文雄
    東京大学大学院工学系研究科建築学専攻

書誌事項

タイトル別名
  • EFFECTS OF MEMBER MODELS ADOPTED FOR COLUMNS ON THE ACCURACY OF NONLINEAR STATIC AND NONLINEAR DYNAMIC FRAME ANALYSIS OF MOMENT RESISTING FRAME STRUCTURES
  • RCゾウ ホネグミ ノ セイテキ ゼンゾウサイカ カイセキ ト ドウテキ ジシン オウトウ カイセキ ニ オケル ハシラ ノ ブザイ モデル ノ エイキョウ

この論文をさがす

抄録

Current seismic resistant design strategy, including Performance-Based Earthquake Engineering (PBEE) requires accurate estimation of the seismic demand and capacity of structures, for which non-linear analysis has been employed for several decades in research and practice. However these analyses on member-basis have been almost indifferent to member models which represent damage distribution along the member. Girberson's one-component model is the most popular one which considers concentrated plastic rotational hinges at member ends. But the assumption is not necessary accurate enough for members of reinforced concrete, because plastic damage distributes due to cracking all through the member. In this study, results of non-linear static analysis (NSA) and non-linear dynamic analysis (NDA) are compared for four different member models. Girberson's one-component model is compared against the other member models for structural response parameters including, story drift demand and member force demand. It is revealed that one-component model overestimates maximum drift demand larger than compared different member models In NSA. Even including higher modes in lateral force distribution does not change the trend. However, member force demand estimated by the one-component model is larger than that by the other models. In NDA, one-component model underestimates the unevenness of drift demand smaller than other models and overestimates the unevenness of member force larger than other models in the intermediate stories.

収録刊行物

参考文献 (24)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ