Ｓｉ添加鋼の高温酸化とサブスケールの形態

DOI Web Site Web Site 被引用文献1件 参考文献24件

書誌事項

タイトル別名
  • High-temperature Oxidation and Subscale Morphology of Si Containing Steels
  • Si テンカコウ ノ コウオン サンカ ト サブスケール ノ ケイタイ

この論文をさがす

抄録

The oxidation behavior of Si-containing steels at high temperature has been the subject of numerous investigations. In many cases, the addition of Si to the steel in sufficient amounts to form an external film of SiO2 or other Si-rich oxide on the steel surface has resulted in extremely slow oxidation rates. However, the steel in which Si content is insufficient forms an external scale and an internal scale on the steel surface and a subscale in the steel interior which are less protective.<br>In order to suppress the growth of the scales on the hot slab which causes surface bruise of hot rolled Si-containing steel sheets, many researchers paid attention to the de-scaling characteristics of Si-containing steels. However, the effects of Si content on the oxidation kinetics, scale composition and scale structure, especially three-dimensional scale morphology formed on the Si-containing steels at high temperatures are not necessarily understood adequately. In this study, the high-temperature oxidation behavior and scale morphology of (0, 0.5, 1.5, 3.0 mass%) Si-containing steels exposed to the flowing air and the LNG combustion gas atmosphere at 1373K or 1473K were investigated. The external scale and the internal scale formed on Si-containing steels were composed of the laminated α-Fe2O3 and Fe3O4 and the mixture of FeO and Fe2SiO4, respectively. The subscale may be composed of vitreous SiO2. The kinetics of the external and internal scale formation were followed by parabolic rate laws. The SEM images of the three-dimensional subscale extracted from the oxidized steels by means of an organic solvent system dissolution technique showed that an intergranular oxide formed thin walls along not only grain boundaries but also twin boundaries of the steel matrix and an intragranular oxide formed isolated particles in the steel grains near the internal scale.

収録刊行物

  • 鉄と鋼

    鉄と鋼 93 (5), 379-385, 2007

    一般社団法人 日本鉄鋼協会

被引用文献 (1)*注記

もっと見る

参考文献 (24)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ