油中水型エマルション中でのゾル-ゲル法による球状多孔質チタニア粒子の調製(<特集>機能性界面と分析化学) Preparation of Porous Titania Spheres by Sol-Gel Method in Water-in-Oil Emulsion(<Special Article>Functional Interfaces for Analytical Chemistry)

    • 山下 浩 YAMASHITA Hiroshi
    • 愛媛大学大学院理工学研究科物質生命工学専攻 Department of Materials Science and Biotechnology, Graduate School of Science and Engineering, Ehime University
    • 尾川 裕介 OGAWA Yusuke
    • 愛媛大学大学院理工学研究科物質生命工学専攻 Department of Materials Science and Biotechnology, Graduate School of Science and Engineering, Ehime University
    • 前川 尚 MAEKAWA Takashi
    • 愛媛大学大学院理工学研究科物質生命工学専攻 Department of Materials Science and Biotechnology, Graduate School of Science and Engineering, Ehime University

抄録

Spherical porous titania particles were synthesized by a sol-gel process from titanium tetraiso-propoxide(TTIP) in a W/O emulsion. These particles were obtained by the addition of diethanolamine(DEA), methanol and colloidal silica particles. The molar ratio of TTIP, DEA, methanol and H_2O was 1 : 1.5 : 4 : 20. Spherical titania particles could be synthesized by a stepwise increasing-temperature process. This process was carried out by stepwise emulsification at 30℃ for 30min, at 40℃ for 30min and at 50℃ for 2h. After calcination at 500℃, the SiO_2 parts in the particles were extracted by a 3 M NaOH aqueous solution. The specific surface area of the particles was 362m^2g^<-1>. The peak pore-diameter of the particles was 6nm.

収録刊行物

分析化学   [巻号一覧]

分析化学 56(6), 511-514, 2007-06-05  [この号の目次]

社団法人日本分析化学会

参考文献:  21件

参考文献を見るにはログインが必要です。ユーザIDをお持ちでない方は新規登録してください。

プレビュー

プレビュー

各種コード

  • NII論文ID(NAID) :
    110006291372
  • NII書誌ID(NCID) :
    AN00222633
  • 本文言語コード :
    JPN
  • 資料種別 :
    NOT
  • ISSN :
    05251931
  • NDL 記事登録ID :
    8859498
  • NDL 雑誌分類 :
    ZP4(科学技術--化学・化学工業--分析化学)
  • NDL 請求記号 :
    Z17-9
  • 収録DB :
    CJP書誌  NDL  NII-ELS  J-STAGE