書誌事項
- タイトル別名
-
- Development of Laser Spot Welded Stainless Steel Double Skin Panels for Rail Vehicle Body
- レーザ スポット ヨウセツ ニ ヨル ステンレス コウ ダブル スキン パネル ザイリョウ ノ カイハツ ダイ2ホウ パネル ノ トウカ ゴウセイ モデル ノ ケントウ
- - 2<sup>nd</sup> Report, Study of Equivalent Rigidity Model of Stainless Steel Double Skin Panel -
- -パネルの等価剛性モデルの検討-
この論文をさがす
抄録
The Stainless steel double-skin panel consists of a corrugated sheet sandwiched between two face sheets and a flange installed on the rim of the panel. Adoption of the laser spot welding in jointing these materials each other has realized such a welded structure with less thermal deformation. This structure has these advantages; the laser spot welding controlling the penetration depth precisely secures resistance to corrosion equivalent to the base material and good design of a luster specific to stainless steels without leaving any welding marks on the outer sheet; the flange installed on the panel raises the stiffness and strength, which enables the use of conventional methods including resistance spot welding just the way they are to joint with other materials.<br>An equivalent stiffness model is required to apply the double-skin structure in a large structure like a rail vehicle body to study the stiffness and the vibration mode in the double-skin structure. But there is a problem that application of FEM model adopting the double-skin structure in detail to a large structure increases the load on the calculator. Thus we tried to solve this problem by creating an equivalent stiffness model of the double-skin panel. First of all, we formulated the equivalent stiffness model of the double-skin panel and studied the validity of the model based on the result of the mechanical property assessment test of a small specimen. Then we prototyped a full-scale rolling stock on which a SUS double-skin panel was installed to conduct various load tests, and evaluated the validity of the model by comparing the measurement value of the deformation amount of the vehicle structure with the calculation result of the equivalent stiffness model. As a result, the possibility of application of double-skin panels to large structures was achieved.
収録刊行物
-
- 精密工学会誌
-
精密工学会誌 74 (12), 1287-1291, 2008
公益社団法人 精密工学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282679772814848
-
- NII論文ID
- 110007007583
-
- NII書誌ID
- AN1003250X
-
- ISSN
- 1882675X
- 09120289
-
- NDL書誌ID
- 9742663
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可