対向カップ型試験片を用いた自動車用高張力鋼板スポット溶接部の疲労特性評価

DOI Web Site Web Site 被引用文献3件 参考文献21件

書誌事項

タイトル別名
  • Strength Evaluation of Spot Weld of High Strength Steel in Fatigue Using Double-Cup Specimen
  • タイコウ カップガタ シケンヘン オ モチイタ ジドウシャヨウ コウチョウリョク コウハン スポット ヨウセツブ ノ ヒロウ トクセイ ヒョウカ

この論文をさがす

抄録

Double-cup (DC) specimens of spot welded joint are newly produced for high strength steel sheets (HSS), and fatigue tests are conducted under three kinds of loading directions (shear, tension and mixed mode) for steel sheets with tensile strength ranging from 270MPa (mild steel) to 980MPa. The fatigue strength is degraded as the load component in the tensile direction increases. The HSSes show higher fatigue strength than the mild steel under the shear loading, whereas the fatigue strength of the JIS tensile-shear (TS) specimen is almost equal regardless of the steel grade. The deformation behavior and the stress state are investigated for the DC and TS specimens by finite element analysis. In the TS specimen, the spot weld rotates and it is subjected to the mixed mode loading. Moreover, the tensile stress of the HSS is higher than that of the mild steel under the identical load because the smaller plastic deformation takes place in the HSS. In the DC specimen, on the other hand, rotation of the spot weld is smaller due to deformation restraint around the spot weld and the stress state is close to pure shear, which may lead to the fair evaluation of the effects of the steel grade.

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (21)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ