ポンプ送水系パイプラインにおけるポンプ急停止時の圧力制御対策 : 汎用スイング逆止弁と無水撃逆止弁の比較

DOI Web Site Web Site 参考文献11件

書誌事項

タイトル別名
  • Pressure Countermeasure Control on Pumping Pipeline System after Pump Power Failure : Comparison between General-purpose Check Valve and the Non-water Hammer Check Valve
  • ポンプ ソウスイケイ パイプライン ニ オケル ポンプ キュウテイシジ ノ アツリョク セイギョ タイサク : ハンヨウ スイング ギャクトメベン ト ムスイゲキ ギャクトメベン ノ ヒカク

この論文をさがす

抄録

An traditional pipeline system for water pumping and conveyance has designed to include a flywheel and other facilities for suppressing negative pressure to a depth of 7 m or below in order to prevent water column separation. If the occurrence point of water column separation and the influence of the separation on the pipeline can be accurately identified, an optimal design can be adopted for each pipeline, which permits water column separation to occur without inflicting damage. Field experiments were conducted for evaluating water column separation during a pump power failure and the resulting water hammer pressure caused by recombination of the columns. The effect of implementing a general-purpose check valve or the non-water hammer pressure check valve was investigated. When restarting a pump after a sudden stop, it was found that a pressure rise can be suppressed by opening the bypass valve of the non-water hammer check valve. In addition, it was found that using an independent air choke valve to draw in air during times of negative pressure prevented the spread of the negative-pressure region and thus suppressed water column separation. The field experiments revealed that safety of pipeline is ensured by preventing recombination of the separated water columns, at the regions where water column separation is generated by the negative pressure.

収録刊行物

参考文献 (11)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ