1A2-H08 多自由度イオン導電性高分子アクチュエータの開発 : 微細加工技術を応用した電極のパターニング(MEMSとナノテクノロジー)

• 菊地 邦友

  和歌山大

• 清水 一平

  和歌山大院

• 土谷 茂樹

  和歌山大

書誌事項

タイトル別名

• 1A2-H08 Development of Multi-DOF Ion Conductive Polymer Actuator : Electrode Patterning on Ion Conductive Polymer by Microfabrication Technique(MEMS and Nano-Technology)

抄録

Polymer actuators are attracting considerable interest due to their special characteristics, including high flexibility and low weight. Ionic polymer-metal composite (IPMC) are polymer actuators that exhibit remarkable bending at driving voltages lower than 2 or 3 V. They have the potential to be used as soft robotic actuators. IPMC consists of a thin ion-exchange membrane with noble metal electrodes formed on both surfaces. Highly durable IPMCs will be fabricated using an electroless chemical plating technique to form metal electrodes. In this research, we have been developed a fabrication method of IPMC with patterned electrode which will be capable of a peristaltic movement. In this paper, we describe a fabrication method for patterning electrodes by the electroless chemical plating technique with SF_6 plasma treatment and the results of performance evaluation of IPMC with SF_6 plasma treatment.

収録刊行物

• ロボティクス・メカトロニクス講演会講演概要集

  ロボティクス・メカトロニクス講演会講演概要集 2011 (0), _1A2-H08_1-_1A2-H08_3, 2011

  一般社団法人 日本機械学会

キーワード

• Electrode patterning
• Ionic polymer actuator
• multi-DOF
• Plasma treatment

詳細情報

• CRID: 1390282680915933440
• NII論文ID: 110009690740
• DOI: 10.1299/jsmermd.2011._1a2-h08_1
• ISSN: 24243124
• Web Site: https://www.jstage.jst.go.jp/article/jsmermd/2011/0/2011__1A2-H08_1/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可