J041022 非線形超音波法による9Cr鋼溶接継手材のクリープ損傷評価の研究([J041-02]超音波計測・解析法の新展開(2))

DOI Web Site

書誌事項

タイトル別名
  • J041022 Nonlinear ultrasound method to evaluate creep damage of welded joint in 9Cr steel

抄録

In this study, we monitored the change of acoustic nonlinearity with electromagnetic acoustic resonance (EMAR) during creep damage in 9Cr steel welded joint, under lOOMPa, 923K. Resonant frequency shift by nonlinear ultrasound spectroscopy (NRUS) and second and third harmonics were measured as the nonlinear acoustic parameters. These were resonance-base techniques exploiting the significant nonlinear behavior of damaged materials. EMAR was combination to electromagnetic acoustic transducer (EMAT) with resonant acoustic technique. We used axial shear wave EMAT to monitor NRUS and harmonic amplitude of SH wave propagating in the circumferential direction of sample surface. Axial shear wave EMAT was operated with the magnetic strain effect. Furthermore, use of EMAT makes non-contact transduction possibility. NRUS detected damage by using resonant frequency shift. In measurement of resonant frequency shift, as the excitation level increase, resonant frequency was shifted and manifested the elastic nonlinearity. Measurement of harmonics with EMAR, drive of EMAT at half or one third the resonance frequency, the standing wave generate the second or third-harmonics by nonlinear effect. In addition, ultrasonic attenuation measured simultaneously. Measured nonlinear acoustic parameter showed the peak at 25% of creep life. We assumed that these trends were resulted from the increase of void density and the change of dislocation structure.

収録刊行物

  • 年次大会

    年次大会 2013 (0), _J041022-1-_J041022-5, 2013

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ