J161013 ステンレス基板上圧電薄膜を用いたMEMSエナジーハーベスター([J161-01]マイクロナノメカトロニクス(1))

DOI Web Site

書誌事項

タイトル別名
  • J161013 Piezoelectric thin-film MEMS energy harvesters of stainless steel cantilevers

抄録

We developed piezoelectric thin-film MEMS energy harvesters using stainless steel (SUS430) cantilevers to improve fracture toughness as well as to lower the resonant frequency. The large fracture toughness of SUS430 cantilevers overcomes the breakdown of the cantilevers and ensures the long lifetime of the energy harvesters. To simplify the fabrication process, the piezoelectric Pb(Zr,Ti)O_3 (PZT) thin film was directly deposited on the microfabricated SUS430 cantilevers with a 30-μm-thick beam and a tip mass by rf-magnetron sputtering. The X-ray diffraction (XRD) measurement revealed that the PZT thin film has perovskite structure with random orientations. The relative dielectric constant ε_r and the transverse piezoelectric coefficient е_<31,f> were respectively evaluated to be 325 and -4.0 C/m^2, which indicates the figure of merit (FOM) of 0.049. From the evaluation of power generation performance for the PZT thin-film energy harvester (beam length: 5.5 mm, width: 5.0 mm, mass length: 2.0 mm), its maximum output power was 6.8 μW (power density: 1.7 μW/mm^3) under conditions of 367 Hz and 10 m/s^2.

収録刊行物

  • 年次大会

    年次大会 2013 (0), _J161013-1-_J161013-5, 2013

    一般社団法人 日本機械学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ