PS10 ショットピーニングを施したSUS304の300°Cにおける内部疲労き裂発生機構

DOI Web Site

書誌事項

タイトル別名
  • PS10 Subsurface fatigue crack initiation mechanism of shot-peened type 304 at the elevated temperature of 300°C

抄録

Ultrasonic shot peening was applied to stainless steel type 304, and rotating bending fatigue tests had been performed at the elevated temperature of 300℃. The shot-peened specimens showed subsurface fatigue crack initiation with typical fish-eye at 300℃ in the high cycle fatigue region (≈10^7 cycles). The crack initiation site was cut by the wire saw method, and observed on the longitudinal section by EBSD technique in detail. Inclusions such as intermetallic compounds were not recognized at the sub-surface crack initiation site, indicating that the crack initiation was due to cyclic slip deformation. Sub-surface crack initiated in the grain with many twins. It was considered that the twining had played important role in the sub-surface crack initiation at the elevated temperature.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ