書誌事項
- タイトル別名
-
- OS0117 Effect of additive elements on mechanical properties in solid solution strengthened titanium alloys
抄録
In order to clarify the effect of additive elements on mechanical properties in solid solution strengthened titanium alloy, pure titanium (CP-Ti), Ti-1 mass% Al (Ti-1Al) and Ti-1 mass% Cu (Ti-lCu) alloys were prepared. The tensile tests at various temperature and the microstructure observation were carried out. In this study, it was found that the tensile strength and the 0.2% proof stress of Ti-1Al and Ti-1Cu were higher than those of CP-Ti and the total elongation of Ti-iCu was higher than that of Ti-1Al. The 0.2% proof stress of Ti-1Cu from 100℃ to 500℃ was highest among them. A lot of deformation twins were observed in CP-Ti and Ti-1Cu deformed at room temperature. From these results, the increase of the tensile strength and the total elongation are considered to be due to the number of twin in Ti-1Cu.
収録刊行物
-
- M&M材料力学カンファレンス
-
M&M材料力学カンファレンス 2014 (0), _OS0117-1_-_OS0117-3_, 2014
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205876097920
-
- NII論文ID
- 110009939444
-
- ISSN
- 24242845
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可