20210 導電性ポリマーを用いたマイクロアクチュエータの作製

• 金子 新

  首都大

• 杉原 達記

  首都大

• 武田 伊織

  首都大

• 井上 諒

  首都大

書誌事項

タイトル別名

• 20210 Fabrication of conducting polymer micro-actuator

抄録

This paper describes fabrication process and actuation properties of micro-actuator utilizing a conducting polymer for cell stimulation. Photo resist was patterned to 10 μm diameter hole-array on an ITO glass. This substrate was used as a working electrode for electro deposition of poly pyrrole (PPy). A PPy dot-array was deposited on ITO exposed area of the substrate. When electro charge reached 130 mC, diameter and height of PPy dots were 18 ±2 μm and 2 μm, respectively. +1 V and -1 V were applied to the PPy dots in NaDBS solution. PPy dots repeated expanding and swelling with the change of voltage. The maximum expansion rate was about 10 %. It shows the success of fabrication of conducting polymer micro-actuator.

収録刊行物

• 日本機械学会関東支部総会講演会講演論文集

  日本機械学会関東支部総会講演会講演論文集 2014.20 (0), _20210-1_-_20210-2_, 2014

  一般社団法人 日本機械学会

キーワード

• Conducting polymer
• Poly pyrrole
• Micro-actuator
• Cell stimulation

詳細情報

• CRID: 1390001205847651456
• NII論文ID: 110009949359
• DOI: 10.1299/jsmekanto.2014.20._20210-1_
• ISSN: 24242691
• Web Site: https://www.jstage.jst.go.jp/article/jsmekanto/2014.20/0/2014.20__20210-1_/_pdf
• 本文言語コード: ja
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可