2101 焼結および粉末鍛造歯車の疲労強度に及ぼす密度の影響(歯車の疲労強度,一般講演)

DOI Web Site

書誌事項

タイトル別名
  • 2101 Influence of Density on Fatigue Strength of Sintered and Powder-Forged Gears

抄録

In this study, sintered and powder-forged rollers and gears with different densities and nickel contents were fatigue-tested using a roller testing machine and a gear testing machine in order to elucidate their fatigue strength. These experimental results were compared with the results of conventional steel ones. The hardness near the surface of the test specimens with higher nickel content was smaller than that of the other ones. The pores in the sintered rollers became smaller and were disappeared by the hot forging. The fatigue strength of the sintered rollers and gears was the lowest in this experimental range. The fatigue strength of the powder-forged rollers and gears was slightly lower than that of the steel ones. The fatigue strength of the test specimens increased as their density increased, and was hardly influenced by the nickel content in this experimental range. It was clear that the fatigue strength of the sintered and the powder-forged rollers and gears was proportional to the hardness for each pre-alloyed metal powder.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ