Heating rate effects on the crystallization behavior of isotactic polypropylene from mesophase – A de-polarized light transmission study

HANDLE 被引用文献2件 オープンアクセス

この論文をさがす

抄録

It was ever reported in a communication of this journal that the large crystal grains having “bamboo leaf-like (BL)” morphology were produced by a rapid heating of isotactic polypropylene (iPP) from the mesophase. In order to optimize the condition to generate the BL crystals, heating rate effects on the crystallization behavior from the mesophase of iPP have been studied by utilizing a de-polarized light transmission (DPLT) method. The DPLT sensitively detected not only the cold crystallization from the mesophase around 100–120 °C but also the crystal grain growth in a narrow temperature region just below the melting temperature. With increasing the heating rate, both the temperature regions of the cold crystallization and the crystal grain growth shifted toward the higher temperatures. When the heating rate is slow (<20 °C/min), the crystal grain growth was not conspicuous. With increasing the heating rate, the rate of the crystal grain growth increased and showed a maximum when the heating rate is approximately 60–80 °C/min. However, excessively fast heating (>100 °C/min) also suppressed the crystal grain growth.

収録刊行物

  • Polymer

    Polymer 53 (13), 2777-2782, 2012-06

    Elsevier Ltd.

被引用文献 (2)*注記

もっと見る

詳細情報 詳細情報について

  • CRID
    1050564285688085248
  • NII論文ID
    120004247141
  • NII書誌ID
    AA11537383
  • ISSN
    00323861
  • HANDLE
    2433/157233
  • 本文言語コード
    en
  • 資料種別
    journal article
  • データソース種別
    • IRDB
    • CiNii Articles

問題の指摘

ページトップへ