Selective recovery of indium from the etching waste solution of the flat-panel display fabrication process

• Hasegawa, Hiroshi

• Rahman, Ismail M. M.

• Umehara, Yoshihiro

• Sawai, Hikaru

• Maki, Teruya

• Furusho, Yoshiaki

• Mizutani, Satoshi

抄録

The waste byproducts from the indium-consuming fabrication processes are considered as the viable resource for indium due to the unique preference to the element in designing optoelectronic devices. The present work introduces a new technique for the selective recovery of indium from the etching waste, which produced during the patterning of indium tin oxide (ITO) layer on the flat-panel displays. The process includes the application of a solid phase extraction (SPE) assembly, known as molecular recognition technology (MRT) gel, consisting of a metal-selective ligand immobilized to silica gel or polymer substrates. The samples were the real solution of etching waste from the liquid-crystal display fabrication process, and the simulated waste solution prepared using the commercially available etching solution composition containing ethanedioic acid. The retention and the corresponding indium recovery rate (%) were the key characteristics for the appraisal of MRT-SPE types: AnaLig TE 02 (TE 02), AnaLig TE 03, AnaLig TE 07, AnaLig TE 13 and AnaLig PM 02. The other conclusive factors were the influence of ion intensity in solution and the interfering effects from tin, the co-content element in the ITO-formulation. The TE 02 MRT-SPE came across all the requisite aspects for the selective recovery of indium from the etching effluent. The indium retention or recovery with TE 02 MRT-SPE from the real etching waste solution was in the range of 97 to 99% with the relative standard deviation of <4.4%. The separation of the ITO co-element tin from the waste mixture was successively selective, and thereby minimizes the possibility of interference. A three-step elution with 0.3molL-1 HNO3, 6molL-1 HCl and 1molL-1 HCl/10mmolL-1 EDTA was required to accomplish the sequential selectivity in the process. The indium retention capacity of the TE 02 MRT-SPE was 0.147mmolg-1. © 2013 Elsevier B.V.

収録刊行物

• Microchemical Journal

  Microchemical Journal 110 133-139, 2013-09-01

  Elsevier B.V.

キーワード

• Etching wastewater
• Indium
• Indium tin oxide
• Separation
• Solid phase extraction
• Tin

詳細情報

• CRID: 1050845760872562816
• NII論文ID: 120005254064
• NII書誌ID: AA00738394
• ISSN: 0026265X
• Web Site: http://hdl.handle.net/2297/34666
• 本文言語コード: en
• 資料種別: journal article
• データソース種別:
  • IRDB
  • CiNii Articles