ファインセラミックスの定切込み平面研削加工における研削抵抗の定式化

DOI Web Site

書誌事項

タイトル別名
  • Formulation of Grinding Force of Fine-ceramics in Constant-Cut Surface Grinding
  • ファイン セラミックス ノ テイキリコミ ヘイメン ケンサク カコウ ニ オケル ケンサク テイコウ ノ テイシキカ

この論文をさがす

抄録

There are three processing modes of fine-ceramics, which are ductile mode grinding, brittle mode grinding, and composite mode grinding. Composite mode grinding is the mode which the ductile mode grinding and the brittle mode grinding blend. In this paper, grinding processing models of ductile mode and brittle mode under the constant cut surface grinding was composed, and the grinding force was formulated from these grinding processing models. It was assumed that grinding force in composite mode grinding is proportional to the ratio of the removal volume of ductile mode and brittle mode. In addition, the removal volume of brittle mode was assumed to be proportional to exponential distribution. As the result, the calculated grinding force was well corresponding to the grinding force obtained by experiment. Therefore, the possibility of evaluating the grinding force from both mechanical properties of fine-ceramics and grinding condition was found.

収録刊行物

  • 精密工学会誌

    精密工学会誌 76 (5), 567-571, 2010

    公益社団法人 精密工学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ