Effects of Longitudinal Vibration on Hardness of the Weldments.

• Tewari S. P.

  Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University

• Shanker Anand

  Department of Mechanical Engineering, Institute of Technology, Banaras Hindu University

抄録

The paper pertains to the effects of longitudinal vibration, frequency and amplitude on hardness of the weldments prepared by metal arc welding under dynamic conditions. The frequency range was 0 to 400 Hz and amplitude range was 0 to 40 μm respectively. Investigations show that the hardness of the weldments have increased when compared with the stationary welded test specimens. 0 to 400 Hz frequency range and 5 to 20 μm amplitude range produce good results.

収録刊行物

• ＩＳＩＪ　Ｉｎｔｅｒｎａｔｉｏｎａｌ

  ＩＳＩＪ　Ｉｎｔｅｒｎａｔｉｏｎａｌ 33 (12), 1265-1269, 1993

  一般社団法人 日本鉄鋼協会

キーワード

• mild steel
• weld
• hardness
• stationary
• vibratory
• frequency
• amplitude

詳細情報

• CRID: 1390282681430361088
• NII論文ID: 130000781787
• DOI: 10.2355/isijinternational.33.1265
• ISSN: 13475460
• ISSN: 09151559
• Web Site: http://www.jstage.jst.go.jp/article/isijinternational1989/33/12/33_12_1265/_pdf
• 本文言語コード: en
• データソース種別:
  • JaLC
  • Crossref
  • CiNii Articles
• 抄録ライセンスフラグ: 使用不可