Bi系超電導バルク間におけるレーザ照射による超電導体の形成

書誌事項

タイトル別名
  • Superconductor Formation by Laser Irradiation between the Bulks of Bi System.
  • Biケイ チョウデンドウ バルクカン ニ オケル レーザ ショウシャ ニ ヨル

この論文をさがす

抄録

Possibility of joining of supercondoctor bulks through laser treatment was discussed. A 4.0×4.5×2.0 mm Bi system bulk was used as the material to be joined. Paste of powder of the same phase, which was dispersed in various kinds of solvents such as distilled water, nitric acid (5wt%), ethyl alcohol and 2-butoxyethyl acetate, was used as the medium material. Two pieces of bulk filled with the medium material between them were installed on a jig system and settled on an X-Y table, followed by laser beam irradiation. A 200 W output CO2 laser beam accompanied by oxygen gas blow was irradiated onto the medium along the contact line at a speed 10mm/min. The specimen pasted with 2-butoxyethyl acetate show Tc(on) in electric resistance after laser irradiation. SEM images of the joint after laser irradiation reveal improvement of crystallinity. Those results indicate the possibility of connection of superconducting bulks through laser treatment.

収録刊行物

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ