書誌事項
- タイトル別名
-
- Properties of Submicron Cemented Carbides Prepared by Using Finely Ball-milled Carbide Powders.
- ボール ミル フンサイ ノ タンカブツ フンマツ オ ゲンリョウ ト シテ モ
この論文をさがす
抄録
The carbide powders (WC, VC, Cr3C2) having usual particle size of 1-2.5μm were finely ballmilled under a prescribed condition. Using these fine carbide powders (<0.2μm), WC-VC-Cr3C2-13mass%Co submicron cemented carbides (VC≤10mass% and Cr3C2≤8mass% in binder, respectively) were vacuum-sintered at 1320-1350°C and finally HIP-ed. Microstructures, hardness and transverserupture strength of the alloys were mainly examined.<BR>It has been found that the properties of submicron alloys obtained in the present study are by no means inferior to those of commercially available alloys. It was noted that the ball-milled carbide powders showed a narrow particle distribution, nearly the same as that of commercial powders for preparing submicron alloys.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 41 (6), 709-713, 1994
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390282681286019072
-
- NII論文ID
- 130000819610
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 3881898
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可