書誌事項
- タイトル別名
-
- Low Speed High Torque Drive System Applying Vernier Motor Torque.
- バーニア モータ ノ トルク オ カツヨウシタ テイソク ダイトルク クドウ
この論文をさがす
抄録
The application of the direct drive system is increasing in the field of robot and factory automation because of controllability with high accuracy. However, it requires the motor high torque at low speed.<br>Although the vernier motor, presented by C. H. Lee in 1963, could produce the reluctance torque in low speed, it involved many problems to be solved. In this paper, the authors have studied the reluctance torque of vernier motor using the finite element field analysis. As the increase of rotor slot number is effective to produce high torque, in our model there are not only winding slots but also small slots on the stator teeth surfaces and the rotor slots are provided in the periphery of the core more than the total number of stator slots by the pole number. The calculated torques have agreed very well with the experimental results.<br>A prominent feature of the control scheme is to control the armature current phase based on the detected rotor slot position, so there is no problem such as pull-in or pull-out in the vernier motor of C. H. Lee. And then the instantaneous torque is controlled by the amplitude of armature current. The experimental results on both the speed control and the position control were also shown in the paper.
収録刊行物
-
- 電気学会論文誌D(産業応用部門誌)
-
電気学会論文誌D(産業応用部門誌) 111 (9), 785-793, 1991
一般社団法人 電気学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001204655496320
-
- NII論文ID
- 130000960273
- 10011450531
-
- NII書誌ID
- AN10012320
-
- ISSN
- 13488163
- 09136339
- http://id.crossref.org/issn/09136339
-
- NDL書誌ID
- 3730388
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可