Iron Loss Deterioration by Shearing Process in Non-Oriented Electrical Steel with Different Thicknesses and Its Influence on Estimation of Motor Iron Loss
-
- Toda Hiroaki
- JFE Steel Corporation
-
- Zaizen Yoshiaki
- JFE Steel Corporation
-
- Namikawa Misao
- JFE Steel Corporation
-
- Shiga Nobuo
- JFE Steel Corporation
-
- Oda Yoshihiko
- JFE Steel Corporation
-
- Morimoto Shigeo
- Graduate School of Engineering, Osaka Prefecture University
この論文をさがす
抄録
The influence of the shearing process on the iron loss of non-oriented electrical steels with thicknesses of 0.20-0.50mm was investigated. The deterioration of material iron loss was lesser in thinner steel sheets. The distribution of the increase in hardness near the sheared edge was almost half of the sheet thickness for all tested steels. Therefore, applying thinner steel sheets for the motor core may decrease the iron loss deterioration from the punching process. This argument was supported by measuring the iron loss of a model IPMSM using steels with different thicknesses and calculating the motor iron loss through FE analysis. The magnetic properties of narrow pieces corresponding to the width of the motor's teeth and yoke were shown to be important and useful to estimating the motor iron loss more accurately.
収録刊行物
-
- IEEJ Journal of Industry Applications
-
IEEJ Journal of Industry Applications 3 (1), 55-61, 2014
一般社団法人 電気学会