ステライトによる表面硬化法について
書誌事項
- タイトル別名
-
- A Study on the "Stellite" Hard-Facing
- Specifically on the snake and shaft of "Kinion-pump"
抄録
In current practice "Kinion-pump" snakes and shafts are surfaced with hard-facing filler metal in order to avoid thier abrasion and heat-softening. A most famous grade of hard-facing filler metal is called "Stellite" containing 40-50% Cobalt, 20-30% Chromium, 0.2-0.8% Tungsten and others.<BR>There are many difficulties, however, in the execution of this treatment, i. e, cracking of filler metal, distortion of shaft and so on.<BR>To get rid of these troubles, the writers conducted some experiments and good results have been obtained through the following countermeasures taken:<BR>1) Provide a perfect preheating of the base metal.<BR>2) Avoid overheating of the base metal and over cooling after welding.<BR>2) Select the right kind of filler metal for the base metal.<BR>4) Prevent impurities from entering into deposit metal, as a result of unstable gas flame used.<BR>5) Adopt the proper method of welding operation and procedure.
収録刊行物
-
- 溶接学会誌
-
溶接学会誌 21 (2), 35-38, 1952
一般社団法人 溶接学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390282681477356288
-
- NII論文ID
- 130003762519
-
- ISSN
- 18837204
- 00214787
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可